XL Hydraulic Mini Deck Trailer
The XL 60 HDG: Mini-deck meets bridge clearance heights without sacrificing strength. XL’s superior 3-beam design uses a center box beam resulting in a lighter yet exceptionally strong main deck, amazingly only 8 inches tall. 4-inch junior I-beams on 18-inch centers join the box beam and the side rails.
Highlights
XL Mini-decks feature 12 D-rings per side on the main deck.
The XL Mini-deck’s empty weight allows drivers to easily scale out to maximum payload.
The 3 beam deck design uses steel flooring in the center deck and Apitong in the outer bays.
XL Mini-deck trailers provide the ultimate versatility with 12" loaded deck height and 4" of ground clearance.
XL 60-HDG: Mini-deck
CAPACITY
- 60,000 LB OVERALL
- CONCENTRATED: 60,000 LB IN 16'
GOOSENECK
- HYDRAULIC LOW-PROFILE FULL-WIDTH
- 11' LONG
- 49" 5TH WHEEL HEIGHT
- 5 POSITION VARIABLE RIDE HEIGHT
- 86" SWING CLEARANCE
- 16" KING PIN SETTING
- (2) BENT D-RINGS PER SIDE
- 1 1/8" APITONG DECKING FLUSH
- 13HP HONDA POWER UNIT WITH STEEL COVER
SUSPENSION
- 25,000 LB AIR RIDE
- RAISE AND LOWER VALVE
- MANUAL RIDE HEIGHT CONTROLv
WHEELS & TIRES
- 8.25 X 22.5 STEEL RIMS
- 255/ 70R/ 22.5 H RATED TIRES
AXLES
- (2) 25,000 LB NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- 4S2M ABS
- 16 1/2" X 7" BRAKES
- (2) PAIRS SPRING BRAKES
MAIN DECK
- 19' 8" WIDE WITH 1 1⁄2" CAMBER
- 24" LOADED DECK HEIGHT
- 8" GROUND CLEARANCE
- 2" APITONG DECKING CENTER COVERED WITH SQUARE MESH
- 5 5/8" C-CHANNEL CROSSMEMBERS ON 12" CENTERS
- (2) 16" SIDE BEAMS
- 12" SWING OUT OUTRIGGERS BRACKETS ONLY ON 24" CENTERS
- 9 BENT D-RINGS PER SIDE - 18 TOTAL
- FRONT PIN-ON RAMP STORAGE BOXES IN ROADSIDE MAIN DECK BEAM WITH DOORS AND LOCKS. RAMPS SLIDE INTO DECK
- (2) TOOLBOXES WITH LOCKABLE COVERS LOCATED AT REAR OF MAIN DECK AT TRANSITION TO REAR BRIDGE
- (2) 1' OPEN TOOL WELLS AT FRONT OF MAIN DECK
- DECK PLATE
- RAIL TO BE 1/8" TO 1/4" BELOW WOOD ON TRAILER
- NO GAP BETWEEN RAIL AND WOOD DECKING ON DECK
- FRONT PIN ON RAMPS MUST BE REINFORCED AT THE ATTACHMENT POINT
- LIQUID FILLED AIR GAUGE
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER MOUNTED LED LIGHTS
- (1) MID-TURN SIGNAL PER SIDE
- (2) CLEARANCE LIGHTS PER SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LIGHT PACKAGE WITH ALUMINUM COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48'
- OVERALL WIDTH: 102"
REAR BRIDGE
- 9' LONG
- 40" LOADED DECK HEIGHT
- 1 1/8" APITONG DECKING FLUSH
- (2) FLAG HOLDERS
- (2) BENT D-RINGS IN TAIL CHANNEL
XL 80-HDG: Mini-deck
CAPACITY
- 80,000 LB OVERALL
- CONCENTRATED: 80,000 LB IN 16'
GOOSENECK
- HYDRAULIC LOW-PROFILE FULL-WIDTH
- 11' LONG
- 49" 5TH WHEEL HEIGHT
- 5 POSITION VARIABLE RIDE HEIGHT
- 86" SWING CLEARANCE
- 16" KING PIN SETTING
- (2) BENT D-RINGS PER SIDE
- 1 1/8" APITONG DECKING FLUSH
- 13HP HONDA POWER UNIT WITH STEEL COVER
SUSPENSION
- 25,000 LB AIR RIDE
- RAISE AND LOWER VALVE
- MANUAL RIDE HEIGHT CONTROLv
WHEELS & TIRES
- 8.25 X 22.5 STEEL RIMS
- 255/ 70R/ 22.5 H RATED TIRES
MAIN DECK
- 28' LONG
- T-I FLANGE, 80K WEB
- (2) 8" FAB SIDE I-BEAM
- 4" GROUND CLEARANCE
- 4" JR. I-BEAM CROSS MEMBERS ON 12" CENTERS
- (10) BENT D-RINGS PER SIDE
- 1 1/8" APITONG DECKING FLUSH IN OUTER BAYS
- STEEL FLOOR IN CENTER DECK
- RAMP TAPERS TO 4"
AXLES
- (2) 25,000 LB NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- 4S2M ABS
- 16 1/2" X 7" BRAKES
- (2) PAIRS SPRING BRAKES
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER MOUNTED LED LIGHTS
- (1) MID-TURN SIGNAL PER SIDE
- (2) CLEARANCE LIGHTS PER SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LIGHT PACKAGE WITH ALUMINUM COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48'
- OVERALL WIDTH: 102"
REAR BRIDGE
- 9' LONG
- 40" LOADED DECK HEIGHT
- 1 1/8" APITONG DECKING FLUSH
- (2) FLAG HOLDERS
- (2) BENT D-RINGS IN TAIL CHANNEL
- 4" AMBER STROBE W/ SWITCH TO MAKE 3 STT
- 2 PAIR OF PAN STYLE D-RINGS