- FLOOR: 1/4″ PL, V-Bottom With Integral Formed Side Channels
- FLOOR SUPPORT: 10″ Channel Longitudinal Runners With 8″ Channel And Formed 1/4 PL Channel Crossmembers
- WALLS: 1/4″ PL Solid Welded, Smooth Inside, With formed Channel Supports Outside
- ROOF: 2-Step Design, 1/4″ PL Solid Welded With Channel Supports Outside
- DRAIN / FILL: 4″ Drain At Floor Each End, 3″ Fill Pipe To Roof At Front, 4″ Connection On Front, 8″ Flanged Front Manifold Connection With Inside Flange, 4″ Connection On Roof
- MANWAY: 21″ Manway On Front, Side, And (2) On Roof
- PICK UP: Standard 5th Wheel King Pin
- WELDS: All Welds Continuous Except Substructure Crossmembers
- AXLE: 25,000lb. Axle With Air Breaks, 11.00 X 22.5 Bias Tires On Steel Disc Wheels
- FINISH: Per Customer Specifications
- HYDROTESTING: Full Capacity Static Test
- DIMENSIONS: Overall: 42′ Long, 8′-6″ Wide, 11′ High; 500 Barrel Capacity
- Tank Pressure / Vacuum Relif Vent
- Level Gauging
- OPTIONS: Special Tank Linings, Special Sized, Open Top Design, Fixed Or Removable Stem Coils, 8″ Exterior Manifold Assembly
|
1/4″ Steel Plate Tank Construction Smooth Interior Walls For Easier Cleaning, Round Bottom Floor For Better Drainage, 3″ Fill Line, Manways Conveniently Located On Front, Side And Top 4″ Drains And Front Inlet / Outlet Heavy Duty Nosebar Assembly
- Flange Mount Blaylock LL10 P / V Vent 16oz Pressure, 0.4 Vac Setting
- 2″ Coupling With Plug
- 4″ Flange With Blind Cover
- 21″ Mainway Domed Lid And Bars
- 3″ Elbow Fill Line With Cap
- Safety Walk Way (36″ Grating)
- Access Stairs
- Level Gauge With 8″ Stainless Steel Ball, “Y” Support Hold Ball 1″ Minimum Off Floor
- Front Drain With Valve, Threaded Flange, Plug, Chain
- 21″ Manway, Domed Lid
- 11.00 X 22.5 Tubeless Tire On 10 Hole Steel Wheel
- Folding Hand Rails
- 4″ Flange Valve, Threaded Flange Plug, Chain Remote, Operation Handle Drums, Hutch 9700 Suspension, 3 Leaf High ARch Springs
- 25K Axle, Automatic Slack Adjusters, Top Mounted 30 Service Chambers, Outboard Drums, Hutch 9700 Suspension, 3 Leaf High Arch Springs
- DOT Tail Lights And Lower Market Lights, No Top Lights
- 4″ Coupling With Plug
|
